PUSH TYPE INTERNAL TUBE CUTTER 'ATP SERIES'

PUSH TYPE INTERNAL TUBE CUTTER 'ATP SERIES'

Used to cut the tube from inside.

Features of Push Type Internal Tube Cutters - ATP Series:

  • "Push Type" Internal Tube Cutters quickly cuts through the walls of ferrous tubes in Condensers and Heat Exchangers as a step in their removal from the tube sheet.
  • This Sturdy "Push Type" Internal Tube Cutters can be used with a portable Electric or Air Drill Motor
  • "Push Type" Cutters are simple to operate. Merely insert it into the tube, apply power, press inward and the tube can be cut in a few seconds. Releasing of inward pressure automatically retracts the Cutter Bit. These Tube Cutters are equipped with an adjustable collar suitable for reaching into tubes at various depths.
  • The replaceable cutting bit can be interchanged in a few seconds. Standard adjustable reach is 4 inch (101.6mm) and they are available in optional increments of 2 inch (50.8mm). "A" reach = 6 inch (152.4mm). "B" reach = 8 inch (203.2mm). "C" reach = 10 inch (254.0mm) etc.
  • All Tube Cutters come with a complete set of pilots covering the entire range of tube thickness for a particular tube O.D. (ATP-625 tube cutters come with a built in pilot suitable for one tube ID only.)
  • All Tube Cutters are available for MM tube sizes also. 
Image Code Product Name Favs Price Quantity
PM-ATP-1250
POA
PM-ATP-625-SB
PM-ATP-750-SB
PM-ATP-1000-SB
PM-ATP-875-SB
PM-ATP-1250-SB
PM-ATP-1500-SB
PM-ATP-625
PM-ATP-750
PM-ATP-875
PM-ATP-1000
PM-ATP-1500