• Push Type Internal Tube Cutters quickly cuts through the walls of ferrous tubes in Condensers and Heat Exchangers as a step in their removal from the tube sheet.
  • This sturdy push Type Internal Tube Cutters can be used with a portable Electric or Air Drill Motor.
  • Push Type Cutters are simple to operate. Merely insert it into the tube, apply power, press inward and the tube can be cut in a few seconds. Releasing of inward pressure automatically retracts the Cutter Bit. These Tube Cutters are equipped with an adjustable collar suitable for reaching into tubes at various depths.
  • The replaceable cutting bit can be interchanged in a few seconds. Standard adjustable reach is 4"(101.6mm) and they are available in optional increments of 2"(50.8mm). A reach - 6"(152.4mm). B reach - 8"(203.2mm). C reach - 10"(254.0mm) etc. All Tube Cutters come with a complete set of pilots covering the entire range of tube thickness for a particular tube O.D. (ATP-625 tube cutters come with a built in pilot suitable for one tube ID only.)
  • All Tube Cutters are available for MM tube sizes also. Please enquire.
Tube O.D. Tube Gauge (BWG) Model Spare Cutting Bit Model
5/8 14-22 PM-ATP-625 PM-ATP-625-SB
3/4 14-22 PM-ATP-750 PM-ATP-750-SB
7/8 14-22 PM-ATP-875 PM-ATP-875-SB
1 12-22 PM-ATP-1000 PM-ATP-1000-SB
1 1/4 12-22 PM-ATP-1250 PM-ATP-1250-SB
1 1/2 12-22 PM-ATP-1500 PM-ATP-1500-SB